Bronson Tate is very honored that we were asked to help out with David Fletcher's Master Classes on MyLargescale.com. The items below are the laser cut parts that are needed to complete the various kits.

NOTE:
If you're willing to cut the parts yourself from the PDFs that are provided in the Master Class, you don't need any of these kits to build the Master Class models.
However these kits will save you a lot of time.

Porter Class Kits-
	Kit #1 - Porter Pilot There are two differant types of Pilots offered for the Porters. Long & short. Both are laser cut from plywood. CLICK ON IMAGE FOR PRODUCT INFORMATION.
	Kit #2 - The Arched Window Cab. This is the cab used on CCRR #4 - complete with arched front and side windows, and oval name plate to the cab sides. This kit comes as either a styrene or wood version. CLICK ON IMAGE FOR PRODUCT INFORMATION.
	Kit #3 - The Square Window Cab. This kit is almost identical to the kit above, except the front windows are square, not arched, as used on most of the CCRR Porters. Also note that the name panel to the cab sides is also rectangular. This kit comes as either a styrene or wood version. CLICK ON IMAGE FOR PRODUCT INFORMATION.
	Kit #4 - 4 wheel Tender Kit. This is for the original 4 wheel tenders used on the CCRR Porters. The kit is for the basic structure and chassis. Designed to fit the Hartland mid sized wheels, per the class instructions. You will need to detail and apply embossed wrappers to the tank sides per the class instructions. The kit is designed to remove all the hard cutting from the job. Also the tender flare and corners are provided in the kit, along with journal lids and coulping arm. CLICK ON IMAGE FOR PRODUCT INFORMATION.
	Kit #5 - 6 wheel Tender Kit. This kit is for the 6 wheel CCRR tender. Again designed for Hartland metal wheels. Like the 4 wheel tender kit, this kit will require additional detaling and wrappers per the class instructions. The kit comprises all the tough cutting, flare, chassis and frame members. The CCRR 6 wheel tender came in two heights. This kit has a cut line embossed to the tank sides to enable the top 1/3 of the tank to be snapped off, creating the lower tender tank. You'll see the cut line 2/3 up the side of the tender shell in the photos below. When clad with the wrappers, the line wont be visible on the tall tank version. CLICK ON IMAGE FOR PRODUCT INFORMATION.

Mason Bogie Class Kits-
	Laser cut Styrene Tender Truck. This kit is offered as a styrene solution for the tender truck on the Mason Bogie. The kit is entirely laser cut from 1mm and 2mm styrene, and can accept normal Bachmann metal wheels, or other brands. The mid axle has vertical and lateral movement. The sample took about two hours to complete. No other parts are required to finish the kit except wheels - the kit is otherwise 100% complete truck. CLICK ON IMAGE FOR PRODUCT INFORMATION.
	Laser cut Wooden Cab Kit. Bronson-Tate, in conjunction with FH&PB, is pleased to announce, that we are now offering a wooden cab for David Fletcher's Master Class 2002, Mason Bogie project locomotive. There were two styles of cabs on the Mason Bogie that David has chosen to model. The 1870s cab kit represents the original cabs supplied by the Mason Locomotive Works, with a peaked roof, arched window frames and ornate decorative molding. The 1880s cab is based off of later type with a rounded roof and squared-off windows. CLICK ON IMAGE FOR PRODUCT INFORMATION.
	Laser cut Wooden Pilot Kit. Bronson-Tate, in conjunction with FH&PB, is pleased to announce, that we are now offering a wooden pilot for David Fletcher's Master Class 2002, Mason Bogie project locomotive. This kit will contain the essential parts you need to build an accurate replica of William Mason’s original wooden pilots. CLICK ON IMAGE FOR PRODUCT INFORMATION.